Taperlock Bushes

Taper Lock Bushes

Taper lock bushes are designed to facilitate easy change bush system that can be used in sprockets, pulleys, fan rotors and many other devices.  They are often used to slip into a weld on hub, but can also be machined directly into a sprocket or pulley if there is not enough room for the hub.  We stock a wide range of bore sizes to fit both metric and imperial standard shafts.

Cast taper lock bushes is what is mostly available throughout New Zealand and these are used a lot in easy running applications.
Steel taper lock bushes are slowing coming into New Zealand and being used a lot more when it comes to high impact applications.  Also refered to as TSR bush (Total Shock Resistance) these are the answer to high loading and high torque applications,  The advantages include: Highly Reuasable, Virtually Unbreakable, Easily Machined, Infinitely Stronger and Absorbs a higher shock load.

 
Name Max Bore Max Bore A A L No. of Enquire
MM Inch MM Inch MM Screws
TLB1008 25 1" 35.3 1.390" 22.2 2 Enquire
TLB1108 28 1.1/8" 38.5 1.516" 22.2 2 Enquire
TLB1210 32 1.1/4" 47.6 1.7/8" 25.4 2 Enquire
TLB1215 32 1.1/4" 47.6 1.7/8" 38.1 2 Enquire
TLB1610 42 1.5/8" 57.1 2.1/4" 25.4 2 Enquire
TLB1615 42 1.5/8" 57.1 2.1/4" 38.1 2 Enquire
TLB2012 50 2" 69.9 2.3/4" 31.8 2 Enquire
TLB2517 65 2.1/2" 85.4 3.1/4" 44.5 2 Enquire
TLB2525 65 2.1/2" 85.4 3.1/4" 63.5 2 Enquire
TLB3020 75 3" 108 4.1/4" 50.8 2 Enquire
TLB3030 75 3" 108 4.1/4" 76.2 2 Enquire
TLB3525 90 3.1/2" 127 5" 63.5 3 Enquire
TLB3535 90 3.1/2" 127 5" 88.9 3 Enquire
TLB4040 100 4" 146 5.3/4" 101.6 3 Enquire
TLB4545 115 4.1/2" 161.9 6.3/8" 114.3 3 Enquire
TLB5050 125 5" 177.8 7" 127 3 Enquire