Locking Bush 200 Series CL2

Not Self-Centering (CL2)

Cone clamping unit consists of four pieces with two inside double cone-rings joined through a set of tightening screws. It is recommended for medium to high torques and although it is not self-centering, it can be easily assembled and disassembled. Available for shaft diameters from 20 to 900mm.

Characteristics

Medium - high torque
Wide tolerances
Easy dismantling

Torque = Maximum transmittable torque when axial force is zero

Axial Force = Maximum axial force when transmittable torque is zero

There are 25 products available, you are viewing 1—20.

1 | 2 | Next»

Name	Part No	I.D.	O.D.	L	L1	B	D	Torque Nm	Axial Force N	Enquire
CL24x50	CL24x50B	24	50	17	20	27.5	N/A	370	32000	Enquire
CL25x50B	CL25x50B	24	50	17	20	27.5	N/A	400	32000	Enquire
CL30x55B	CL30x55B	30	55	17	20	27.5	N/A	530	36000	Enquire
CL35x60B	CL35x60B	35	60	17	20	27.5	N/A	750	43000	Enquire
CL38x65B	CL38x65B	38	65	17	20	27.5	930	N/A	49000	Enquire
CL40x65B	CL40x65B	40	65	17	20	27.5	N/A	980	49000	Enquire
CL24x75	CL42x75	42	75	20	24	33.5	N/A	1580	75000	Enquire
CL45x75B	CL45x75B	45	75	20	24	33.5	N/A	1700	76000	Enquire
CL48x80B	CL48x80B	48	80	20	24	33.5	N/A	1790	74000	Enquire
CL50x80B	CL5x80B	50	80	20	24	33.5	N/A	1870	75000	Enquire
CL55x85	CL55x85	55	85	20	24	33.5	N/A	2390	88000	Enquire
CL60x90B	CL60x90B	60	90	20	24	33.5	N/A	2610	88000	Enquire
CL65x95B	CL65x95B	65	95	20	24	33.5	N/A	3210	98000	Enquire
CL70x110B	CL70x110B	70	110	24	28	39.5	N/A	4600	132000	Enquire
CL75x115B	CL75x115B	75	115	24	28	39.5	N/A	4900	131000	Enquire
CL80x120B	CL80x120B	80	120	24	28	39.5	N/A	5200	131000	Enquire
CL85x125	CL85x125	85	125	24	28	39.5	N/A	6300	148000	Enquire
CL90x130B	CL90x130B	90	130	24	28	39.5	N/A	6600	147000	Enquire
CL95x135	CL95x135	95	135	24	28	39.5	N/A	7900	167000	Enquire
CL100x145B	CL100x145B	100	145	26	33	47.0	N/A	9750	195000	Enquire

There are 25 products available, you are viewing 1—20.

1 | 2 | Next»