Locking Bush 110 Series CL1

Self Centering (CL1)

This Locking Bush consists of two conical pieces and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones; so, CL 1 is suitable for the applications where small hubs are used. It is recommended for medium to high torques and is self centering. CL1 guarantees a very prices axial positioning, as no axial displacement of hub occurs during the assembly operation. Available for shaft diameters from 6 to 130mm.

Name	Part No	I.D.	O.D.	L	L1	B	D	Torque Nm	Axial Force N	Enquire
CL24x34	CL24x34T	24	34	25	45	51	56	270	22000	Enquire
CL25x34	CL25x34T	25	34	25	45	51	56	280	22000	Enquire
CL30x41	CL30X41T	30	41	25	45	51	62	510	33000	Enquire
CL35x47	CL35x47	35	47	32	52	58	69	790	45000	Enquire
CL40x53T	CL40x53T	40	53	32	52	58	75	900	45000	Enquire
CL45x59	CL45x59	45	59	45	70	78	86	1890	84000	Enquire
CL50x65T	CL50x65T	50	65	45	70	78	92	2100	84000	Enquire
CL60x77T	CL60x77T	60	77	55	80	88	104	2840	94000	Enquire
CL75x95	CL75x95	75	95	65	96	1006	126	5600	150000	Enquire
CL80x100	CL80x100	80	100	65	96	106	131	8020	200000	Enquire
CL90x112	CL90x112	90	112	65	96	106	144	9000	200000	Enquire
CL100x125	CL100x125	100	125	65	96	106	154	15000	300000	Enquire
CL110x140	CL110x140	110	140	90	128	140	180	16000	290000	Enquire
CL120x155	CL120x155	120	155	90	128	140	198	17500	290000	Enquire